Superb performance and moderate pricing earns the Vengeance RGB Pro DDR4-3200 our Editor’s Choice Award for RGB-equipped memory, though its pastel colors could be off-putting to a couple of builders. Find more in Corsair Vengeance RGB Pro 16GB (2x8GB) DDR4 3200MHz C16 LED Review.
Pros & Cons
FOR
Excellent performance at rated (XMP) settings and across multiple data rates
Supports both Corsair and third-party RGB utilities
Reasonably priced
AGAINST
Didn’t reach DDR4-4000
White light diffusers cast pastel hues
Corsair Vengeance RGB Pro 16GB (2x8GB) DDR4 3200MHz C16 LED Review
Builders who put a premium on aesthetics often face a troublesome choice between the best-looking and best-performance parts. Corsair brings a touch of both in its Vengeance RGB DDR4-3200 kit, providing four 8GB DIMMs (32GB total) at CAS 16 timings for a price that’s reasonably moderate given recent market trends. And this kit isn’t all about looks; it’s the products where benchmarks are concerned, too.
First, some memory basics background is so as . Latency is measured in cycles, and latency time is that the inverse of frequency. Lower is best when it involves latency. So as an example , DDR4-3200 CAS 15 would be better (fewer wait cycles) than CAS 16 at DDR4-3200, which happens to be our performance baseline, also because the spec of this particular kit. DDR4-3200 CAS 17 would be worse (more wait cycles) than our baseline. In other words, Vengeance RGB Pro DDR4-3200 buyers get the additional bandwidth of its high rate without suffering any additional lag.
The full 16-18-18-36 primary timing set of this kit is par for CAS 16 memory at nearly any data rate; a number of Corsair’s competitors are using similar timings at DDR4-3000 and even DDR4-2666. You’ll still need a board that supports XMP memory mode to configure these settings automatically though. the very best non-XMP configuration may be a comparatively pokey DDR4-2133.
Corsair Vengeance RGB Pro DDR4-3200 (4x 8GB) (32GB 8GB RAM) at Amazon for $224.99
Of course, you wouldn’t buy the kit’s RGB feature unless you planned to use it. The default lighting scheme is an unsynchronized pastel RGB wave. But changing it’s as easy as downloading Corsair’s free iCue app. Alternatively, the LEDs also are addressable from motherboard RGB software, like MSI’s Mystic Light.
Choosing your lighting control are often complicated, because Corsair’s application incorporates support for other Corsair devices, but doesn’t address the motherboard’s lights. Meanwhile, motherboard-based RGB controls typically work only with onboard lighting, RGB DIMMs and standard lighting strips. Clearly we’re no where we need to be in terms of RGB synergy.
Corsair Vengeance RGB Pro 16GB (2x8GB) DDR4 3200MHz C16 LED performance Review
We’re comparing Corsair’s Vengeance RGB Pro kit to other RGB-lit modules, using MSI’s Z370 Godlike Gaming and therefore the hardware from its review. Overclocked to 4.80 GHz, Intel’s Core i7-8700K processor works with MSI’s GTX 1080 graphics card and a Toshiba/OCZ RD400 SSD to attenuate other system bottlenecks.
You might notice that two comparison kits within the middle of our charts are from an equivalent company and lack buy buttons. The $500 Spectrix D80 configuration is merely available in U.S. as two $250 two-DIMM kits, and you’ll only get the $374 Spectrix D40 configuration as two $187 two-DIMM kits. But that did not stop Adata from shipping them to us as a four-DIMM kit and asking us to check them intrinsically . Meanwhile, the exceptionally overclockable HyperX Predator RGB sits at the top of our comparisons, thanks to its slower rating.
Latency Tuning, Overclocking & Benchmarks
The spoiler in today’s minimum primary timings test is that the Vengeance RGB Pro DDR4-3200 didn’t reach DDR4-4000. It reached an equivalent DDR4-2400 timings as Adata’s DDR4-3600, but even stepping from DDR4-2400 to DDR4-2666 required a jump to the slower 2T setting for stability. At now , hopes for competitive performance rest with automatically configured advanced timings.
The Vengeance RGB Pro came up just a touch in need of the DDR4-4000 mark and reached DDR4-3944 by increasing the bottom clock to 102MHz at our motherboard’s DDR4-3866 setting.
We’re unsurprised to ascertain Sandra’s bandwidth scaling for our RGB samples matching the kit’s XMP data rates, albeit the bandwidth benchmark is additionally suffering from latency. The surprise instead occurred at DDR4-3733, where the Vengeance RGB Pro’s CAS 17 timings somehow produced more bandwidth than the Spectrix D80’s CAS 16. Those findings were repeated in Sandra Latency, so this might be Corsair’s advanced configuration for the win.
F1 2015 and 7-Zip represent the few applications that are excessively impacted by DRAM performance, whereas Metro Last Light Redux and Blender CPU Render represent typical apps that are only really harmed by truly poor memory configurations. The Vengeance RGB Pro trailed Spectrix D80 in F1 2015 apart from at DDR4-3200, but it had the shortest compression times at every speed in 7-Zip.
Rated at DDR4-3200, the Vengeance RGB Pro comes at a relative bargain compared to the Spectrix D80. On the opposite hand, the Vengeance RGB Pro’s performance wins were far smaller than its price advantage when comparing it to the Spectrix D40.
We previously awarded the HyperX Predator RGB DDR4-2933 (4x 8GB) for its outstanding overclocking capacity. But Corsair’s Vengeance RGB Pro beat the HyperX product in overall performance at every speed, barring the DDR4-4000 setting that it didn’t reach. Corsair also provides a better-performing XMP value and a lower cost than the HyperX kit, making the Vengeance RGB Pro the uncompromised winner here, and a superb addition to your next RGB build.
Corsair Vengeance RGB Pro 16GB (2x8GB) DDR4 3200MHz C16 LED customer Review
Surprisingly better than standard 3200mhz memory
Very good ram! I went from just the low profile vengeance lpx to the rgb pros and it made a big difference in FPS (about 35-40fps gain) and I never expected memory to Boost frames, but it does! Make sure xmp is turned on for best performance. The only thing I hated was the icue app that messed up the updates and I was stuck with one rainbow and one red which was annoying but did not affect performance just the rgb lighting. Had to delete app and reinstall it. Fixed that problem.
By DiMarcoMafia at Best Buy
Note
When you purchase something after clicking links in our articles, we may earn a small commission. Read our affiliate link policy for more details.
Editor’s recommendations
- How To Use Elgato Cam Link 4K For Broadcasting & Live Streaming?
- Samsung (MZ-V7SLT0B/AM) 970 Evo Plus SSD 1TB – M.2 NVMe Interface Review
- WD My Passport Portable Hard Drive – 5TB : How To Use?
- Seagate Desktop 8TB External Hard Drive HDD Review – Does It Need Power Supply?
- CalDigit TS3 Plus Thunderbolt 3 Dock Review – How To Connect Dual Monitor?
